| 翻訳と辞書 |
| Wiederkehr GHW-1 Cu-Climber ： ウィキペディア英語版 |
Wiederkehr GHW-1 Cu-Climber
The Wiederkehr GHW-1 Cu-Climber is an American, high-wing, single-seat glider that was designed by George H. Wiederkehr and first flown in 1968.〔Said, Bob: ''1983 Sailplane Directory, Soaring Magazine'', page 43. Soaring Society of America November 1983. USPS 499-920〕
==Design and development==
The Cu-Climber is an original design and is of mixed construction, with the fuselage of fibreglass with foam bullkheads, forming a semi-monocoque structure. The wings are a fiberglass and balsa sandwich, with fibreglass skin, except aft of the spar on the under-surface where aircraft fabric covering is employed. The wing also features a large 12 inch (30 cm) X 6 inch (15 cm) box spar that is made from spruce, plywood and fiberglass, which is stressed to +9.6/-6.3 g. The wing employs a Pfenninger 14% airfoil.〔〔
The control surfaces include an all flying tail fitted with an anti-servo tab and full-span ailerons of very short chord that act as flaps when drooped for glidepath control. The landing gear is a fixed monowheel that is faired to reduce drag.〔〔
The aircraft's designation of ''GHW-1'' indicates the designer's initials. Unusually the aircraft is registered with the Federal Aviation Administration simply as ''Amateur Built 68 glider''. Only one example was ever constructed.〔〔〔
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Wiederkehr GHW-1 Cu-Climber」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|